palm oil mill equipment machinery are a kind of widely used plate and frame type oil filter machine, simple usage, stable performance, and applicable to filter of crude oil and bleached oil.This frame oil filter palm oil mill equipment machinery is composed of filter plates, filter frames, oil pump and filter cloth, etc.When the rice bran oil solvent extraction plant production line is pumped into the filtering machine, under the different pressure in and outside the machine, the crude oil go through the filtering cloth and come out from the pipr under the filter plate.While the oil dregs remains on the surface of the filtering cloth, thus realizing the filtering process.Shandong Leader Machinery Co.,ltd. Packing & Loading:All machines, which is less than a full container, are packed by the standard wooden case for exporting. So it is safe and strong enough for a long journey from our factory to your place.If all the rice bran oil solvent extraction plant production line machines are shipped by a full container, the container will be loaded in our factory by our workers. Also,
rice bran oil solvent extraction plant production line
1. Introduction of oil solvent extraction equipment
Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure.
Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, noncondensable gas exchanges heat with condensate from the evaporative condenser.
Finally, the condensate temperature discharged from energy saver is increased, and the solvent separated water from going to the solvent holding tank.
The high temperature makes it unnecessary to be reheated for the recycling, so as to save energy. Noncondensable gas from energy saver enters desolventizing condenser, in which a great deal of gas is condensed, and the tail gas is discharged into the final condenser.
The solvent gas from the extractor enters extraction condenser, and the noncondensable tail gas enters the final condenser.
For the free gas in final condenser, diversion box, holding tank, underground solvent library and miscella tank, cool them with low temperatured cold water to recycle most of solvent gas. The tail gas with little solvent goes to paraffin recovery process.
Residual oil in meal
≤ 2Kg/T (No.6 solvent oil)
Crude oil moisture and volatile matter
≤ 280KG/T (0.8MPa)
Finished meal moisture
≤ 13% (adjustable)
Residual solvent in finished meal
≤300PPM (qualified detonated experiment)
2. Main parts of rice oil solvent extraction equipment
(1) Solvent pumps: continuously spray solvent to the rotary-type extractor
(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
(3). DTDC: usd to separate the solvent from the wet meal.
(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.
(5). Miscella tank 2nd: the purified miscella will be pumped into it.
(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
3. Main Process of rice oil solvent extraction equipment
(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
4 . Advantages of rice oil solvent extraction equipment
(1) High oil yield , obvious economic benefit .
(2) Residual oil rate in the dry meal .
(3) Improving the quality of the meal .
(4) low processing cost , high labor productivity.
palm oil mill equipment machinery is one oil extraction plant of the most advanced ,it comparing with traditional false bottom type , retain low power , equipments run reliably , long working time , easily to maintain , a big advantage of oil extracting effect . And Shandong Leader Machinery Co.,ltd. also have large output , simple structure ,low running breakdown ,and advantages of oil extracting effect . if you have a edible oil mill project, rice bran oil solvent extraction plant production line a good choice for you. (1) Function: Solvent extraction system is an oil extraction through soaking or spraying oil cake by a certain organic solvent. The principle of this part is the different solubility of solvent. (2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of low-oil-content materials. (3) Main parts: The extraction series includes extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time. Email:email@example.com Whatsapp:+86 13064099546 Skype:leaderfoodmachine21 Contact:Mandy
NOTE:We can specially design the machine according to your production's features.